Shenzhen PakHeng Electronics Ltd


Catalogue


Contact US


Tel: 86-755-86229698


Fax : 86-755-86229508


Email: sales01@pakheng.com / sales20@pakheng.com 


Address: The 3rd Industry Zone, Yanchuan, Songgang, Baoan District, Shenzhen, Guangdong, China

Axial Copper Lead Wire Metal Oxide Film Pin Hole Through Fixed Resistors 1/6W 1/8 Watt 2.7ohm 3.3ohm 3.9ohm With Resistors Function

Axial Copper Lead Wire Metal Oxide Film Pin Hole Through Fixed Resistors 1/6W 1/8 Watt 2.7ohm 3.3ohm 3.9ohm With Resistors Function

Pak Heng is a factory specializing in passive resistors degining and manufacturing for more than 20 years.we can supply you Copper Lead Wire Axial Metal Film Pin Hole Through Fixed Resistors 5 Watt 2.7ohm 3.3ohm 3.9ohm with Resistors Function with high performance and factory price.We are expecting build friendly long-term business relationship with you.

    Axial Copper Lead Wire Metal Oxide Film Pin Hole Through Fixed Resistors 1/6W  1/8 Watt 2.7ohm 3.3ohm 3.9ohm With Resistors Functionn

    Metal-oxide film resistors are fixed form, axial resistors.  They are made of ceramic rod that is coated with a thin film of metal oxides, such as tin oxide. Metal oxide film resistors must not be confused with metal oxide varistors, made of zinc oxide or silicon carbide.

    Features:

    Metal oxide film resistors exceed the performance of metal film and carbon film for the following properties: power rating, voltage rating, overload capabilities, surges and high temperatures. Designers choose often the metal oxide film resistor for high endurance applications. For an overview of resistor types with their properties, look here. Stability properties are less good than for the metal film resistor. The metal oxide film resistors have poor properties for low values and tolerance. The temperature coefficient is around 300 ppm/°C, which is higher than for metal film types.

    Construction

    The metal oxide film is mostly produced with chemical deposition methods. Almost always a ceramic carrier is used as substrate.

    Drawing Structure:

    MOR.png

    A、 High heat exchanged Ceramic core.

    B、 High stability Electric conduction film.

    C、 Iron Cap.

    D、 Epoxy resin coating.

    E、 Color Ring.

    F、 Tinned copper lead wire or CP lead wire.


    Dimension and Voltage Performance:

     

    Part No.

     

    Power

     

    Resistance

    range

    Dimensions(mm)

    Max. working voltage

    Max. overload voltage

    Max. Pulse voltage

    Max. insulation voltage

    L

    ±1

    D

    ±0..5

    d

    ±0.05

    CMO016

    MOR016

     

    1/6W

    0R-1M

    3.2

    1.7

    0.41

    150V

    300V

    300V

    200V

    CMO14S

    MOR14S

    1/4WS

    0R-1M

    3.2

    1.7

    0.41

    150V

    300V

    300V

    200V

    CMO014

    MOR014

    1/4W

    0R-1M

    6.0

    2.3

    0.45

    200V

    400V

    500V

    250V

    0.52

    CMO12S

    MOR12S

    1/2WS

    0R-1M

    6.0

    2.3

    0.45

    200V

    400V

    500V

    250V

    0.52

    MOR012

    1/2W

    0R1-1M

    9.0

    3.2

    0.58

    250V

    400V

    500V

    250V

    MOR01S

    1WS

    0R1-1M

    9.0

    3.2

    0.58

    350V

    600V

    750V

    350V

    MOR01B

    1W

    0R1-1M

    11

    4.5

    0.75

    350V

    600V

    750V

    350V

    MOR02S

    2WS

    0R1-1M

    11

    4.5

    0.75

    350V

    600V

    750V

    350V

    MOR02B

    2W

    0R1-1M

    15

    5.0

    0.75

    350V

    600V

    750V

    350V

    MOR03S

    3WS

    0R1-1M

    15

    5.0

    0.75

    350V

    600V

    750V

    350V

    MOR03B

    3W

    0R1-1M

    24

    8.0

    0.75

    500V

    800V

    1000V

    500V

    MOR05S

    5WS

    0R1-1M

    24

    8.0

    0.75

    500V

    800V

    1000V

    500V



    Typical applications

    Many properties of metal oxide film resistors are similar to metal film resistors. For basic use, metal film and metal oxide film are currently the predominant resistor types. Compared to carbon film, the prices are just as low. Only for dissipation values above 1 watt combined with reasonable stability, the carbon film resistors are still more cost efficient.

    Test Item:

    1)Insulation resistance: 1000M ohm or more

    2)Voltage endurance: The resistance variation shall be within±(2% + 0.05ohm) and there shall be no mechanical breakage

    3) Intermittent overload:Resistance variation shall be Within ±(2.00% + 0.05ohm

    4) Solder ability:More than 95% of the surface of the lead shall be covered by new solder after the leads are dipped in the

    Solder

    5) Humidity load test:Resistance variation be Within ± (2.0% + 0.05ohm) Also there shall be mo mechanical breakage

    6)Terminal strength:Resistance variation shall be within±(0.5% + 0.05ohm) also there Shall be on mechanical breakage

    7)Heat resistively Against soldering:Resistance variation shall be within ± (1.0%+0.05ohm) also there Shall be on mechanical breakage


    Metal Oxide Film Resistors  Lead Wire Regular Forming Package Type:metal film resistor T type.jpg


    0.125W METAL OXIDE FILM RESISTORS B PACKAGE IN BULK.jpg

    1/6 Watt MOR Series Resistors B Type Package in Bulk


    0.125W TAPING TYPE METAL OXIDE FILM RESISTORS.jpg

    1/6 Watt MOR Series Resistors T Taping Type


    Our Package:

    Each ohm value individually packaged and neatly labeled for easy organization.Sorted by ohm value. Find each ohm value quickly without reading color bands.


    FAQ

    Q1: How long is your delivery time?

    Pakheng: Generally it is 1-2 working days if the goods are in stock. Or it is 7-10 days if the goods are not in stock, it is according to quantity.


    Q2: Do you provide samples ? is it free or extra?

    PakhengYes, normally we could offer the sample for free charge but do not pay the cost of freight.

     

    Q3: How do you guarantee my goods right?

    Pakheng: Order will be arranged exactly as requested, we will doubly check the packing and qty before delivering out also we will take you photos if required or necessary.

     

    Q4: Is it OK to print my logo on the packing?

    Pakheng: Of course, customized packing accepted!! But it may bring some cost, it depends on the qty and the packing. 

     

    Q5: What is your terms of payment ?

    Pakheng: Full 100% payment before delivery by T/T.

      

     [Shipping]

    1. We will ship the items within 5 working days after the payment confirmed.

    2. We can ship to you by UPS/DHL/TNT/EMS/FedEx. Please contact us directly and we will use your preferred ways. For the Countries & Regions where EMS cannot deliver, please choose other shipping ways.

    3. We are not responsible for any accidents, delays or other issues caused by the forwarder.

    4. Any import fees or charges are on the buyer's account

     [Refund & Replacement]

    1. We appreciate your business and offer an instant 7 days return policy. (7 days after receiving the items).

    2. If the items you purchase from our store are not of perfected quality, that is they don't work electronically to manufacturers specifications, simply return them to us for replacement or refund.

    3. If the items are defective, please notify us within 3 days of delivery.

    4. Any items must be returned in their original condition to qualify for a refund or replacement.

    5. The buyer is responsible for all the shipping cost incurred.

     


    PakHeng Electronics is one of the leading axial copper lead wire metal oxide film pin hole through fixed resistors 1/6w 1/8 watt 2.7ohm 3.3ohm 3.9ohm with resistors function manufacturers and suppliers in China, offering the free sample and competitive price. Welcome to wholesale the high quality bulk resistors made in China from us. It if of good performance and high safety.
Related Products
Inquiry